OnePlus Turbo 7 Pro Clears China’s 3C Certification with 100W Charging Ahead of December Launch
OnePlus looks to be lining up its next battery-focused mid-ranger. A new OnePlus phone carrying the model number PYP110 has passed China’s 3C certification, and tipster Digital Chat Station identifies it as the upcoming OnePlus Turbo 7 Pro. The listing, dated November 17, points to 100W wired charging — the one detail the certification actually confirms. Everything else about the phone is still tipped, not official, and OnePlus has confirmed nothing about the name, price or launch date.
Key specs:
- Charging: 100W wired (3C-certified, model PYP110)
- Battery: Over 9,000mAh (tipped; a test unit is reported to reach 10,000mAh)
- Display: 6.78-inch flat 1.5K OLED, 185Hz peak refresh rate (tipped)
- Chipset: Qualcomm SM8845 Pro, expected as Snapdragon 8 Gen 5 Pro (tipped, name unconfirmed)
- Camera: 200MP main camera, tipped with a large 1/1.55-inch sensor
- Launch: December 2026 in China, alongside the standard Turbo 7 (tipped)
What the 3C listing actually confirms
The 3C certificate lists two compatible power adapters, the VCBAOBCH and the VCBAJDCH. On a 200-240V supply both can deliver up to 11V at 9.1A, which works out to 100W — a step up from the 80W charging on the OnePlus Turbo 6, which launched in January with a 9,000mAh battery. The listing does not reveal the battery size, the chipset or any other specification, so those details all come from leaks. Certification filings like this usually appear shortly before a launch, which fits the tipped December window. See GizmoChina’s report for more on the certification.
Tipped specs: a big battery and a fast screen
According to Digital Chat Station, the Turbo 7 Pro is tipped to pack a battery of at least 9,000mAh, with an engineering sample reportedly carrying a 10,000mAh cell. If that holds, it would be one of the largest batteries in a OnePlus phone yet. The same leak points to a 6.78-inch flat display with 1.5K resolution and a 185Hz peak refresh rate, with a 165Hz system-wide rate — the same system-wide figure as the flagship OnePlus 15. On the camera side, a 200MP main sensor is tipped, reportedly a large 1/1.55-inch ISOCELL HP5. Treat all of these as unconfirmed until OnePlus says so itself.
Chipset and a possible global name
Under the hood, the phone is tipped to use Qualcomm’s upcoming 3nm SM8845 Pro chip, which is expected to launch as the Snapdragon 8 Gen 5 Pro — though the final marketing name is still unconfirmed, and some reports call it the Snapdragon 8 Gen 6 instead. There is also a tipped global angle: the Turbo 7 Pro could later reach markets outside China as the OnePlus 16R, following the pattern of earlier Turbo models being rebadged. That, too, is unconfirmed for now.
What happens next
With the 3C hurdle cleared and a December launch tipped, expect official teasers from OnePlus in the coming weeks if the timeline holds. Until then, the only confirmed fact is the 100W charging — the battery, screen, chip and camera all remain leaks. We will update this story when OnePlus confirms the phone. The OnePlus Turbo 7 Pro 3C certification is, for now, the only official step toward that launch.
The Turbo 7 Pro is shaping up as a performance phone built around battery life, if the leaks are right. For now, though, it is a certification and a set of tips — not a launch. Keep an eye on MobileInner for the official announcement.
